How to Care for Your Dental Handpiece: The High-Speed Drill and Chuck

First, when caring for your handpiece, never deviate from the guidelines provided by the manufacturer. Be sure to utilize the correct PSI with your handpiece, which is often between 30 and 40. By increasing the pressure, you will shorten the life of the handpiece's bearings and chuck. In addition, the chuck and bearings will be quickly worn out if you operate your handpiece with the burr drawn out to extend its reach.

Then, wipe out the exterior with alcohol or warm water with a soft to medium bristle brush, as appropriate. The dental handpiece bearing kits should not be submerged in liquid or exposed to any chemicals. Unless instructed to do so by the manufacturer, ultrasonic cleaners should not be used.

You may be interested in the technical details of the high-speed handpiece and how it catches rubbish before we proceed. The high-velocity handpiece forces air out of both the crown and the scalp. It is possible to turn off the handpiece by releasing the air control or rheostat. The handpiece is currently sucking in dust partials of a particularly microscopic size. Because the air flow is reversed as you release the air, pollutants like teeth dust are drawn in. Contaminants will bake into the turbine and within the chuck if the debris is not removed.

My own experience and discussions with other premium dental handpiece parts specialists www.qualitydentalservices.com have led me to conclude that there are five fundamental procedures involved in maintaining a high-speed handpiece. There are two that we have already discussed. Decide on a lubricant, which brings us to our third point. To get to the lubrication, the spray's propellant must first evaporate. A syringe or oil pen is what I employ. As the oil is under your complete control, I think this is the preferable option.